Acquiring a used refrigerator may be advantageous since you will spend less than you would have if you were to buy a new one. You may decide to purchase it from an individual or from a used appliance store. However, if you only need the fridge for a short duration if time, you can opt for fridge hire Sydney from an Australian refrigeration company. For instance, Cold Display Solutions offers fridge hire Sydney. The fridges that the company offers are less than two years old, therefore they are still efficient in their operations. In addition, the company not only offers fridge hire Sydney, but to all other parts of Australia.
However, before acquiring a used appliance, you need to consider the following factors.
Avoid refrigerators that are too old
A fridge that is over ten years old might be inefficient in its operations. In addition, its running costs might be very high compared to those of a new fridge since the old model will use more energy. Inspect the condenser coils that are located at the bottom or behind the appliance. If they are damaged or too dirty, it is a sign that the previous owner was not keen in maintaining it. You may need the advice of an expert in assessing the appliance since this is an indication that the motor might have been strained and might not function properly. In case you want to hire, get your fridge from a renowned company like the Cold Display Solutions, which offers fridge rental Sydney, that are only two years old.
Measure your space
Before visiting a store that offers used fridge for sale, ensure that you have measured the space where you intend to install the appliance. This is because, once you buy the used fridge, you might not be able to return it for replacement. Therefore, it is critical to have the length, width and depth measurements of your available space. Moreover, note the direction that the fridge doors open. This is to ensure that, it swings in the correct direction for your kitchen. In case the direction is wrong, ascertain whether the door can be reversed and be fixed to fit your kitchen.
Shelves, drawers and racks
Ensure that all parts are intact and can easily be removed for cleaning. In case they are missing, establish whether the replacement parts can be located easily in the market. If the used fridge is appealing to you and its parts are available in the market then it means that maintaining the appliance is possible. In the same wavelength, ensure that the control switch and light knobs are functioning properly. The fridge and freezers doors should have a correct seal so as not allow any leakage of air. This can be tested by placing a polythene paper between the door and the fridge. There should be some resistance when removing it if the seal is proper. However, if the paper can be removed easily, it’s a sign that the appliance hinges need to be adjusted.
Ask for a demonstration and warranty
It is advisable to ask the seller to show you how the appliance works since trying it on your own might be risky, more so if you are buying it from an individual. Connect it to a power source to ensure that it cools properly. The freezer should be 0 degrees while the refrigerator should be between 38-40 degrees Fahrenheit. In case you get it from a Sydney refrigeration hire company, ask for a three months warranty on the used appliance.